Spindle Lifting SYSTEMS
Proven and powerful Spindle Lifting Systems
Spindle Lifting Systems
Spindle Lifting Systems owns linear units and lifting columns with integrated spindle drives are controlled synchronously using a control box and manual control switch. A wide range of spindle lifting elements distributed by Ergo Lift Solutions have an integrated engine that drives a spindle and generates a linear movement.
Up to four lifting components can be connected to a synchronous control system and smoothly retracted and extended.
THE RIGHT PARTS FOR THE SYSTEM THAT YOU NEED
Spindle Lifting features
A portion of the features of our Spindle Lifting Systems
- Simple Plug & Play assembly and start-up.
- Generous legroom and more design scope as the drive is installed directly in the lifting element.
- No reestablishing power is required.
Our Spindle Lifting Systems also allow for horizontal adjustment.
- The Lifting System is only available with an Electric Motor (for a Hand-Crank Solution, see hydraulic catalogue).
- As our control units are connected in parallel. They can drive up to 12 lifting elements synchronously.
High loads with small dimension
The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35×35 mm (SLA) or 45×45 mm (SLG). Up to 8 linear units can be connected to two controllers box and are operated synchronous with a hand switch.
The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35×35 mm and 45×45 mm fit perfectly in steel profiles 40×40 mm or 50×50 mm, which are often used as carriers and legs for work stations.
Compared to the linear unit SLA, the SLG can withstand higher bending moments and is more stable.
We recommend the SLA and SLG linear unit for industry, furniture and catering.
The following accessories are available:
- Mounting plates
- Adjustable rubber foots
- Aluminum feet
- Castors
- Tube fitting (only for SLA)
Compact lifting column for more space beneath the table
The spindle lifting column SE is a very compact lifting column made of steel with a cross section of 50 x 50 mm. Because of its small mounting size there is a lot of space under the table top and room for substructures. With a lifting and pulling load of 1500 N per lifting column, sturdy 4-legged workbenches with a lifting load of 600 kg can be realized.
The spindle lifting columns can be ordered individually or as a complete table base frame. Ideal for workbenches, assembly tables and tables for watchmakers.
With our control box up to 12 lifting columns can be driven synchronously.
The following accessories are available:
- Crossbars in various lengths
- Leveling feet
- Casters
The lifting column for industrial and assembly tables
The lifting column SQ consists of a colorless anodized aluminium profile with a cross-section 45×45 mm. The stainless steel tube is guided in a plastic bushing and is moved by a spindle drive. Up to 8 linear units can be connected to two controllers box and are operated synchronous with a hand switch.
There are T-slots on 2 sides of the leg (width 8mm). These allow the mounting of crossbars and attachments along the entire length of the column.
The following accessories are available:
- Crossbars in various lengths
- Table feet with adjusting screws
- Base plates
For spindle driven workplaces and tables
Set up ergonomic workplaces for different areas with the elegant spindle lifting column SL. It is used for assembly tables, in assembly systems, for mechanical engineering, height adjustable beds and massage tables.
The column SL consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each column has an internal motor that drives the threaded spindles. These are driven synchronously by the control box. Up to 12 lifting columns can be connected.
The T-slots on 3 sides (width 8 mm) allow the connection of crossbars, shelves, attachments and mountings along the entire length of the column.
The following accessories are available:
- Crossbars in various lengths
- Table feet with adjusting screws
- Base plates
- Angle bracket
Slim and compact
The leg SM consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has an internal motor that drives the threaded spindles. Up to 12 spindle Lifting legs can be connected to one control box and are operated synchronous.
The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg.
The following accessories are available:
- Crossbars in various lengths
- Table feet with adjusting screws
- Base plates
Angle bracket